owa_product_header_hr3-5-fl_0922

Ocean Way Audio’s HR3.5FL: All the Accuracy, Now Even Louder

At a Glance:

  • Tri-amped proprietary integrated dual/hybrid waveguide system
  • 3400 watts/channel of pure power
  • A-4100 Amplifier: Tri-Amplifier w/OWA Voicing Module & 15’ cables
  • 1” HF 80 watt compression driver, 8” LF 500 watt driver, 12” sub-bass drivers per channel
  • Capable of delivering 130db SPL with incredibly solid bass and center imaging performance
  • Ultra-Wide controlled 100 H / 40 V degree dispersion, 25Hz to 22kHz
  • Digital & analog inputs, accepting 24bit / 192kHz data streams
  • Can be set up free-standing or soffit-mounted with supplied remote amplifiers

It’s the Next Step Up for Your Studio

The Ocean Way Audio HR3.5FL is a stand-alone or soffit-mounted monitor speaker delivering a frequency response of 25 Hz to 22 kHz with a solid SPL of 130db. It incorporates an integrated 2-way dual-horn system with a 1” HF and 8” MF drivers, mechanically time-aligned with twin 12” sub-bass drivers per channel. Three OWA-supplied state-of-the-art amplifiers per channel power this speaker with both analog and digital inputs, 96 kHz and 24 bit sampling, tri-amped delivering 3,400 watts per channel of pure power. At the heart of the acoustic design is OWA’s geometrically- complex dual/hybrid waveguide system.

The system delivers accurately-matched and detailed imaging with our signature unusually wide 100×40 degree horizontal and vertical dispersion, yielding a massive sweet-spot across a broad area of the listening environment. The consistency of its stereo image, even at the far corners of the room, is due to the highly-consistent directivity response of this unique speaker system.

IMAGES

Ocean Way Audio HR3.5-FL. Click to enlarge.
Ocean Way Audio HR3.5-FL. Click to enlarge.
A-4100 Amplifier. Click to enlarge.
A-4100 Amplifier (rear panel). Click to enlarge.
Optional riser for OWA HR3.5/HR3.5-FL. Click to enlarge.
Optional riser for OWA HR3.5/HR3.5-FL. Click to enlarge.

SPECIFICATIONS

Powered:Yes. Accepts analog/digital inputs 24 bit/96 kHz
Driver Configuration:3-way, compression-driven horns/waveguides
HF Driver Size/ Amp:1”/500W per channel
MF Driver Size/ Amp:8″/500W per channel
LF Driver Size/ Amp:Twin 12″/2400W per channel
Amplifiers:Rack-mountable, Soffit or Free Standing installations
Horz/Vert Directivity Ctr:100 / 40 degrees
Frequency Range 3-Way:25Hz-22kHz
Maximum Peak SPL 3-Way:130dB
Enclosure Type:Ported
Dimensions:43″H x 17.5″ W x 25.5”D
Weight:185 lbs (each)

All specifications subject to change without notice.